The B140-1A0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1A0 is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
 Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1A0 to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft..
 Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..
- General Information
- Manufacturer
- Eaton Corporation
 - Manufacturer Website Address
- http://www.eaton.com
 - Brand Name
- Tripp Lite series
 - Product Type
- Video Extender Receiver
 
- Warranty
- Limited Warranty
- 1 Year
 
- Technical Information
- Connectivity Technology
- Wired
 - Number of Input Devices Supported
- 1
 - Number of Output Devices Supported
- 1
 - Maximum Operating Distance
- 200 ft
 
- Video
- Graphics Modes
- Full HD
 - Maximum Video Resolution
- 1920 x 1080
 
- Interfaces/Ports
- Network (RJ-45)
- Yes
 - DVI Out
- Yes
 - Number of Network (RJ-45) Ports
- 1
 - Number of DVI Outputs
- 1
 
- Media & Performance
- Media Type Supported
- Twisted Pair
 - Twisted Pair Cable Standard
- Category 6
 
- Physical Characteristics
- Receiver Height
- 1"
 - Receiver Width
- 2.50"
 - Receiver Depth
- 3.60"
 
- Miscellaneous
- Package Contents
- B140-1A0 DVI over Cat5 Active Extender Remote Unit
- Mounting Hardware
- Screwdriver for adjustment of Equalization
- External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
- Owner's Manual
 
 - Certifications & Standards
- TAA
 - Country of Origin
- Taiwan
 - TAA Compliant
- Yes
 - Environmentally Friendly
- Yes
 
 
                 
                                 
                                 
                                 
                                 
                                 
                                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                